Vacuum Butterfly Valve
Vacuum butterfly valve has high flow conductivity for turn on or cut off the vacuum airflow. The applicable media is air and non-corrosive gas. In order to get the control automatically, solenoid valve and position indicator are optional device.
a) GI type manual or worm gear operated valve has multiple open and close locking function, angle degree of the plate is 0o-90o.
b) GIQ type pneumatic vacuum butterfly valve operated by compressed air and through electromagnetic device to change the airflow control the actuator rotated then drive the valve open or closed. Actuator can be double acting and single-acting spring return type, also can driven intelligent positioner through the external input signal to control the pneumatic driving.
c) GID series electric butterfly valve operated by electrical device to drive the valve plate to open or closed. Electric actuator is passive contact type as factory setting, can be optional on-off and regulating control type to achieve adjusting control.
Scope Of Application |
|
Valve Leakage Rate |
≤1.3×10-5Pa.L/S |
Medium Temperature |
-25~+80oC (NBR) -30~+150oC (Viton) |
Installation Status |
Any |
Opening And Closing Angle (Manual) |
0~90° (GI Series) |
Air Pressure (Pneumatic Actuator) |
0.4~0.6MPa (GIQ Series) |
Operating time (Electric Actuator) |
10s、20s、30s (GID Series) |
Power Supply |
Generally:AC220V/50HZ Optional:AC110V、DC24V |
Body、Disc、Stem |
Carbon Steel、Stainless Steel |
Seal |
NBR、Viton |
Electromagnetic High Vacuum angle Valve
The GDC-J series Electromagnetic High Vacuum angle Valve is a high performance device which can turn on or cut off the vacuum airflow in the vacuum pipeline when by electromagnetic drive. a) With an good control circuit, the temperature from the solenoid coils less than 50°degree; b) A counter-top atmosphere functions; c) Superior performance of a wide range of power supply: low voltage start, low voltage is maintained, for 50Hz / 60Hz power supply can be applied; d) On – off operation time is short than <1 seconds, working frequency is up to 6 times / min; As a on - off control valve using, usually mounted on the control node vacuum path; As an air gas valve using, can shorten the air charging time, usually adopt to automatic control.
More